Maximize Your Reach.

Designed for safety, functionality and serviceability, our platforms can flow large volumes of water or perform precision rescue operations—like a Swiss Army knife, they can do it all. Our platform controls have infinite feathering, ramping features, and low/medium/high “shift on the fly” speed controls providing smooth multi-function operation of the aerial, even at low angles of elevation and fully extended.

A 1,500 GPM flow rating is standard, with monitor capabilities of 45º up and down, and a full 180º horizontal sweep.

At a Glance

  • 5-section ladder design
  • 1000 lbs. dry / 500 lbs. wet tip-load
  • 4 H-style outriggers
  • Up to 1500 GPM waterway flow
  • Up to 300 US gallon tank capacity
  • Low travel height
  • Spartan
  • Smeal

Angle of Elevation

-12° to 72°

Vertical Reach

100′

Horizontal reach

99′

Stabilizer Spread

18′

Tip load

1000 lbs. dry / 500 lbs. wet

Safety Innovations

Spartan Advanced Protection System

Protects like no other with the industry’s #1 rated safety system.

Outboard Sensors

Detects multi-angle impacts allowing faster deployment of airbags with sensors mounted on the outer perimeter of the cab.

Side impact protection

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Eight Air Bag Positions

Eight airbag positions, the most offered by any manufacturer, including knee and side curtain airbags. These give your apparatus the highest available impact and anti-ejection protection on the market.

Side impact protection:

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags:

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags:

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Industry-First Outboard Sensors

State-of-the-art outboard sensors protect occupants from multi-angle impacts in the cab. These sensors are mounted at the outer perimeter of the cab providing a “zone of safety” inside the cab. Each sensor communicates back to the restraint control module that monitors which airbag should deploy and under what conditions.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Cab Construction

Spartan offers flat, 5″, 10″, 20″, and 24″ raised roof options that are reinforced with C-channel supports. As well as multiple seating configurations to provide your crew with extended legroom, improved visibility, additional storage and provides extra safety from triple-reinforced box front bulkhead, engine compartment, front and rear step assemblies.

Features

Resources

Brochures

Aerial Brochure