LOW TRAVEL HEIGHT. MAXIMUM REACH.

For many departments, the dimension that drives aerial apparatus selection is the overall height. This 100′ rear mount ladder design is based around our 105′ aerial structure; however, we have shaved off 5” of overall height thanks to lower aerial side rails. So you can fit it into your fire station and under all the bridges, overpasses and aqueducts that stand in the way of a quick response.

The 500 lb. tip load rating while flowing 1,250 GPM at zero degrees give you all the firefighting power you need. Available with or without a pump and tank, you have the configuration flexibility for your next rear mount ladder while keeping your maximum reach and performance.

At a Glance

  • Available in quint or traditional truck style
  • 4-section ladder design
  • 500 lb. Tip-load dry/wet UNRESTRICTED
  • 2 front down and 2 rear H-style outriggers
  • 1250 gpm waterway flow
  • Spartan

Angle of Elevation

-6 to 72°

Vertical reach

100′

Horizontal Reach

97′

Stabilizer Spread

18’

Tip load

500 lbs. Unrestricted

Safety Innovations

Spartan Advanced Protection System

Protects like no other with the industry’s #1 rated safety system.

Outboard Sensors

Detects multi-angle impacts allowing faster deployment of airbags with sensors mounted on the outer perimeter of the cab.

Side impact protection

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Eight Air Bag Positions

Eight airbag positions, the most offered by any manufacturer, including knee and side curtain airbags. These give your apparatus the highest available impact and anti-ejection protection on the market.

Side impact protection:

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags:

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags:

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Industry-First Outboard Sensors

State-of-the-art outboard sensors protect occupants from multi-angle impacts in the cab. These sensors are mounted at the outer perimeter of the cab providing a “zone of safety” inside the cab. Each sensor communicates back to the restraint control module that monitors which airbag should deploy and under what conditions.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Cab Construction

Spartan offers flat, 5″, 10″, 20″, and 24″ raised roof options that are reinforced with C-channel supports. As well as multiple seating configurations to provide your crew with extended legroom, improved visibility, additional storage and provides extra safety from triple-reinforced box front bulkhead, engine compartment, front and rear step assemblies.

Features

Resources

Brochures

Aerial Brochure