MANEUVERS LIKE A PUMPER, BUT WORKS LIKE AN AERIAL.

The TeleSqurt® Telescoping Boom-Ladder is a compact, rated aerial allowing you to respond with the maneuverability of a pumper. It’s the ideal first-out unit for departments that respond to a variety of fire and rescue calls with a demand for aerial operations.

TeleSqurts® are available in two models, with vertical reaches of 50’ and 65’. Each features fold-down hand rails that can be positioned in the traveling position for low overall heights of 11’2” and 11’9” respectively to handle low station doors, aqueducts, bridges and overpasses.

At a Glance

  • High strength, extruded aluminum box boom design
  • 65' model: 3-section boom | 50' model: 2-section boom
  • Short wheelbase with minimum overhang
  • 1000 GPM master stream
  • Up to 750 lbs. dry / up to 250 lbs. wet tip-load
  • 11’ 2” and 11’9” standard travel height
  • Fold down hand rails
  • Boom elevation range -10° to 85°
  • Narrow 11’9” stabilizer spread allows setup in tight streets
  • Spartan
  • Ladder Tower

Vertical Reach

50′ and 65′

Horizontal Reach

42’and 60′

Stabilizer Spread

11′ 9″

Nozzle Vertical Rotation

200°

Nozzle Horizontal Rotation

90°

Safety Innovations

Spartan Advanced Protection System

Protects like no other with the industry’s #1 rated safety system.

Outboard Sensors

Detects multi-angle impacts allowing faster deployment of airbags with sensors mounted on the outer perimeter of the cab.

Side impact protection

Protects all occupants from side impact collisions, rollovers and occupant ejection. The only company in the industry whose airbags protect cab occupants from side impacts.

Driver knee airbags

Protects against injuries resulting from hitting the instrument panel or other interior points of contact. Locks the lower body in place so the upper body can be slowed and protected by the steering wheel airbag.

Full side curtain airbags

Protects from a side impact or a rollover with airbags up to three times larger than other manufacturers. Each rear side airbag is custom-sized for the crew area of every cab built, with the largest rear side airbag covering seven times the area of any other manufacturer.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Industry-First Outboard Sensors

State-of-the-art outboard sensors protect occupants from multi-angle impacts in the cab. These sensors are mounted at the outer perimeter of the cab providing a “zone of safety” inside the cab. Each sensor communicates back to the restraint control module that monitors which airbag should deploy and under what conditions.

Advanced Seatbelts

Pulls the occupant into the seat in the event of an impact, or rollover using pyrotechnic pretensioners that provide more force during the initial lock. After the occupant is pulled into the seat, load limiters release some of the webbing to control the occupant’s deceleration into the airbag system, helping to mitigate the strain on each occupant, further reducing seatbelt-related injuries.

Cab Construction

Spartan offers flat, 5″, 10″, 20″, and 24″ raised roof options that are reinforced with C-channel supports. As well as multiple seating configurations to provide your crew with extended legroom, improved visibility, additional storage and provides extra safety from triple-reinforced box front bulkhead, engine compartment, front and rear step assemblies.

Features

Resources

Brochures

Aerial Brochure